linia

upc

CIMNE                          Severo Ochoa

etseccpb

linia

rmee

linia

mc2

linia

 

 

miguel.cervera

Miguel Cervera

Index

 

Websites

 

 

 

 

 

 

Personal Data

Name:

Miguel Cervera

Position:

Professor of Continuum Mechanics and Structural Analysis, UPC

Phone:

+34 93 401 64 92

Email:

miguel.cervera@upc.edu

Address:

Module C1, Campus Norte UPC
Jordi Girona 1-3
08034 Barcelona - Spain

 

 

Degrees

1983:

Ingeniero de Caminos, Canales y Puertos: Universitat Politècnica de Catalunya

1986:

Doctor of Philosophy in Civil Engineering: University of Wales

1988:

Dr. Ingeniero de Caminos, Canales y Puertos: Universitat Politècnica de Catalunya

 

 

Biography

Prof. Miguel Cervera is Ingeniero de Caminos, Canales y Puertos (UPC, 1983), Doctor of Philosophy in Civil Engineering (University of Wales, 1986), Dr. Ingeniero de Caminos, Canales y Puertos (UPC, 1988). He was Associate Professor of Continuum Mechanics and Structural Analysis (1988-1999) and is Professor of Continuum Mechanics and Structural Analysis (since 1999) at the Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos of Barcelona (UPC). He has been Deputy Director for Infrastructures and Resources (1990-1991), Head of Studies for Civil Engineering (1991-1994), Deputy Director for Academic Coordination (1994-1996), Academic Registrar (1996-1997) and Head of Doctoral Studies (2016- ) at the Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos of Barcelona. In 1988 he was one of the founder members of the Spanish Society for Numerical Methods in Engineering (SEMNI), member of the Executive Committee of SEMNI (1996-2018).

In 1998 Prof. Miguel Cervera was co-winner of the Honorable Mention for the Award "City of Barcelona on Technological Research". In 2012 he won the UPC Board of Trustees Award for Quality Career in University Teaching. Also in 2012, he was awarded the "Jaume Vicens Vives" Medal for Excellence in University Teaching by the Government of Catalonia. In 2016 he received the "IACM Fellows Award", bestowed by the International Association for Computational Mechanics for a distinguished record of research, accomplishment and publication in areas of Computational Mechanics
.

Prof. Miguel Cervera has published 14 books in Mechanics and Strength of Materials and in Structural Mechanics, used as reference textbooks in graduate and post-graduate courses in Engineering and Architecture in universities in Spain, Argentina, Peru, Guatemala and Portugal.

Prof. Miguel Cervera has published 123 research papers in JCR scientific journals, over 200 communications in International Conferences, Congresses and Symposiums and 24 monographs and 9 book chapters in the field of non-linear computational mechanics of solids, with focus on finite element technology, non-linear constitutive modeling, and thermo-mechanical and coupled problems and numerical simulation of construction and production processes.

Prof. Miguel Cervera has participated in 70 national and international research conferences, acting in 47 of them as member of the Scientific or the Organizing Committee. He has also co-organized a number of special invited sessions and has been invited as keynote lecturer in several international conferences, including the IV World Congress on Computational Mechanics (1998). He also acts regularly as referee for 49 international scientific journals and has been co-editor of a special issue of the International Journal of Plasticity on Numerical Simulation of Forming Processes (2001). He is member of the Editorial Board of the "Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería", "Advances in Industrial Engineering and Management", “Metals” and “Frontiers in Built Environment (Computational Methods in Structural Engineering)”.

Prof. Miguel Cervera has participated in numerous financed research projects, most of them related to the application of Finite Elements Methods to the development of tools for Computer Aided Engineering, with focus on the industrial applications of thermo-mechanical processes with phase change and chemical interactions. These include different techniques for Additive Manufacturing, Metal Deposition, Welding and Casting.

 

 

Research Interests

»  Computational methods in applied sciences and engineering.
»  Finite element formulations.
»  Nonlinear computational mechanics.
»  Constitutive modelling.
»  Stabilization methods in solid and fluid mechanics.
»  Simulation of industrial processes with emphasis on coupled problems.
»  Thermomechanical simulation of casting, metal deposition, welding and related processes.

 

 

Research & Technology transfer Projects

 

»  European Commission funded research projects

 

                             

    

»  Spanish Government funded research projects 

 

                          http://www.empleo.gob.es/es/img/HOME/cabecera/logoGdE.png     

     

»  Technology transfer projects

 

                           

 

 

 

Papers in Journals

128. M. Cervera, G.B., Barbat, M. Chiumenti  and J.Y. Wu. "A Comparative Review of  XFEM, Mixed FEM and Phase-Field Models for quasi-brittle cracking" (2021) Submitted to Archives of Computational Methods in Engineering.

127. Xufei Lu, Guohao Zhang, Junjie Li, Miguel Cervera, Michele Chiumenti, Jing Chen, Xin Lin and Weidong Huang. "Simulation-assisted investigation on the band formation and microstructural evolution of laser solid formed Ti6Al4V blocks" (2021) Submitted to Acta Materialia.

126. S. Kim , M. Cervera, J.Y. Wu and M. Chiumenti. "Strain Localization of Orthotropic Elasto-Plastic Cohesive-Frictional Materials: Analytical Results and Numerical Verification" (2021) Submitted to Computers & Structures.

125. M. Cervera, J.Y. Wu, M. Chiumenti and S. Kim. "On the mechanics of strain localization in plasticity: Isotropic and orthotropic, elasto- and rigid-plastic, associated and non-associated models" (2021) Submitted to International Journal of Solids and Structures.

124. N. Dialami, M. Chiumenti,  M. Cervera, U. Chasco. Guillermo Reyes-Pozo and Marco A. Pérez. "Printing pattern based material characterization and enhanced performance analysis of FFF components: Experimental and computational validation" (2021) Submitted to Computers & Structures.

123. E. Moreno, N. Dialami and M. Cervera. "Modeling of spillage and debris floods as Newtonian and Viscoplastic Bingham flows with free surface with mixed stabilized finite elements" (2021) Journal of Non-Newtonian Fluid Mechanics, in press.

122. Chiumenti, M., Cervera, M., Moreira, C..A., Barbat, G.B. "Stress, strain and dissipation accurate 3-field formulation for inelastic isochoric deformation" (2021) Finite Elements in Analysis and Design, in press.

121. Xufei Lu, Xin Lin, Michele Chiumenti, Miguel Cervera, JunJie Li, Liang Ma, Enquan Liang. "Substrate design to minimize residual stresses in Additive Manufacturing" (2021) Materials and Design,  202, 109525, https://doi.org/10.1016/j.matdes.2021.109525.

120. Saloustros, S. Cervera, M., Kim, S.. and Chiumenti, M. "Accurate and locking-free analysis of beams, plates and shells using solid elements" (2021) Computational Mechanics, https://doi.org/10.1007/s00466-020-01969-0.

119. N. Dialami, M. Chiumenti,  M. Cervera, R. Rossi, U. Chasco and M. Domingo. "Numerical and experimental analysis of the structural performance of AM components fabricated by Fused Filament Fabrication technique" (2021) International Journal of Mechanics and Materials in Design, 17, 225–244, https://doi.org/10.1007/s10999-020-09524-8.

118. Baiges, J., Chiumenti, M., Moreira, C.A., Cervera, M., Codina, R. "An Adaptive Finite Element strategy for the numerical simulation of Additive Manufacturing processes" (2021) Additive Manufacturing,  37, 101650 https://doi.org/10.1016/j.addma.2020.101650.

117. Xufei Lu, Miguel Cervera, Michele Chiumenti, JunJie Li, Xianglin Ji, Xin Lin. "Modelling of the effect of the building strategy on the thermomechanical response of Ti-6Al-4V rectangular parts manufactured by laser directed energy deposition" (2020) Metals, Special Issue on Additive Manufacturing: Experimental and Numerical Simulation of Metallic Materials, 10(12), 1643, https://doi.org/10.3390/met10121643.

116. Barbat, G. B., Cervera, M. and Chiumenti, M. "Structural size effect: experimental, theoretical and accurate computational assessment" (2020) Engineering Structures, 213, 110555, https://doi.org/10.1016/j.engstruct.2020.110555.

115. Cervera, M., Barbat, G. B. and Chiumenti, M. "Architecture of a multi-crack model with full closing, reopening and sliding capabilities" (2020) Computational Mechanics, 65, 1593–1620, https://doi.org/10.1007/s00466-020-01836-y.

114. N. Dialami, M. Cervera and M. Chiumenti. "Defect Formation and Material Flow in Friction Stir Welding" (2020) European Journal of Mechanics A / Solids, 80, 103912, https://doi.org/10.1016/j.euromechsol.2019.103912.

113. E. Nieva, M. Chiumenti, M. Cervera, E. Salsi, G. Piscopo, S. Badia, A. Martí­n, Z. Chen, C. Lee and C. Davies. "Numerical modelling of heat transfer and experimental validation in power-bed fusion with the Virtual Domain Approximation" (2020) Finite Elements in Analysis and Design, 168, Paper 103343, https://doi.org/10.1016/j.finel.2019.103343.

112. M. Cervera, J.Y. Wu, M. Chiumenti and S. Kim. "Strain localization analysis of Hill's orthotropic elastoplasticity: Analytical results and numerical verification" (2020) Computational Mechanics, 65, 533–554,  https://doi.org/10.1007/s00466-019-01782-4.

111. Xufei Lu, Xin Lin, Michele Chiumenti, Miguel Cervera, JunJie Li, Liang Ma, Lei Wei, Yunlong Hu, Weidong Huang. "Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: modelling and experimental calibration" (2019) Additive Manufacturing, 26, 166-179, https://doi.org/10.1016/j.addma.2019.02.001.

110. Xufei Lu, Xin Lin, Michele Chiumenti, Miguel Cervera, Yunlong Hu, Liang Ma, Weidong Huang. "In-situ Measurements and Thermo-mechanical Simulation of Ti-6Al-4V Laser Solid Forming Processes" (2019) International Journal of Mechanical Sciences, 153-154,  119-130, https://doi.org/10.1016/j.ijmecsci.2019.01.043.

109. G. Vlachakis, M. Cervera, G. B. Barbat and S. Saloustros. "Out-of-plane seismic response and failure mechanism of masonry structures using finite elements with enhanced strain accuracy" (2019) Engineering Failure Analysis, 97, 534-555, https://doi.org/10.1016/j.engfailanal.2019.01.017.

108. N. Dialami, M. Cervera and M. Chiumenti. "Effect of the tool tilt angle on the material flow and heat generation in Friction Stir Welding" (2019) Metals, 9(1), 28, https://doi.org/10.3390/met9010028.

107. N. Dialami, M. Cervera, M. Chiumenti and A. Segatori. "Prediction of joint line remnant defect in Friction Stir Welding" (2019) International Journal of Mechanical Sciences 151, 61-69, https://doi.org/10.1016/j.ijmecsci.2018.11.012.

106. S. Saloustros, M. Cervera and L. Pelà. "Challenges, tools and applications of tracking algorithms in the numerical modelling of cracks in concrete and masonry structures" (2018) Archives of Computational Methods in Engineering, https://doi.org/10.1007/s11831-018-9274-3.

105. E. Salsi, M.  Chiumenti and  M. Cervera. "Modeling of microstructure evolution of Ti6Al4V for Additive Manufacturing" (2018) Metals, 8(8), 633, https://doi.org/10.3390/met8080633.

104. Chiumenti, M., Gonzalez, J.M., Cervera, M., Samaniego, F., Cobo, I. "Numerical analysis of the manufacturing processes of a mock-up of the ITER NHF First Wall Panel" (2018) Fusion Engineering and Design, 135, Part A, 65-73, https://doi.org/10.1016/j.fusengdes.2018.07.012.

103
. M. Chiumenti, M. Cervera, E. Salsi and A. Zonato. "A phenomenological model for the solidification of eutectic and hypoeutectic alloys including recalescence and undercooling" (2018) Journal of Heat Transfer, 140(8), 082301, https://doi.org/10.1115/1.4039991.

102. N. Dialami, M. Cervera and M. Chiumenti. "Numerical modelling of microstructure evolution in Friction Stir Welding (FSW)" (2018) Metals, 8(3), 183, https://doi.org/10.3390/met8030183.

101. Xufei Lu, Xin Lin, Michele Chiumenti, Miguel Cervera, JunJie Li, Liang Ma, Lei Wei, Yunlong Hu, Weidong Huang. "Finite Element Analysis and Experimental Validation of Thermomechanical Behavior in Laser Solid Forming of Ti-6Al-4V" (2018) Additive Manufacturing, 21, 30-40, https://doi.org/10.1016/j.addma.2018.02.003.

100. Barbat, G. B., Cervera, M. and Chiumenti, M. "Appraisement of planar, bending and twisting cracks in 3D with isotropic and orthotropic damage models" (2018) International Journal of Fracture, 210(1-2), 45-79, http://dx.doi.org/10.1007/s10704-018-0261-3.

99. Wu, J.-Y. and Cervera, M. "A novel positive/negative projection in energy norm for the damage modeling of quasi-brittle solids" (2018) International Journal of Solids and Structures, 139–140, 250-269, https://doi.org/10.1016/j.ijsolstr.2018.02.004.

98
. Cervera, M.,  Tesei, C and Ventura, G. "Cracking of quasi-brittle structures under monotonic and cyclic loadings: a d+/d- damage model with stiffness recovery in shear" (2018) International Journal of Solids and Structures, 135, 148171, http://dx.doi.org/10.1016/j.ijsolstr.2017.11.017.




 

 


97. N. Dialami, M. Cervera, M. Chiumenti, A. Segatori and W. Osikowicz. "Experimental validation of a FSW model with an enhanced friction model: application to a threaded cylindrical pin tool" (2017) Metals, Special Issue on Recent Achievements in Rotary, Linear and Friction Stir Welding of Metals Alloys, 7(11), 491, https://doi.org/10.3390/met7110491.

96. N. Dialami, M. Chiumenti, M. Cervera, A. Segatori and W. Osikowicz. "Enhanced friction model for Friction Stir Welding (FSW) analysis: simulation and experimental validation" (2017) International Journal of Mechanical Sciences, 133, 555-567, https://doi.org/10.1016/j.ijmecsci.2017.09.022.

95. E. Nieva, M. Chiumenti, E. Salsi, M. Cervera, S. Badia, J. Moya, Z. Chen, C. Lee and C. Davies. "Numerical modelling and experimental validation in selective laser melting" (2017) Additive Manufacturing, 18, 171-185, http://dx.doi.org/10.1016/j.addma.2017.09.002.

94. Cervera, M., Barbat, G. B. and Chiumenti, M. "Finite element modelling of quasi-brittle cracks in 2D and 3D with enhanced strain accuracy" (2017) Computational Mechanics, 60(5), 767–796, http://dx.doi.org/10.1007/s00466-017-1438-8.

93. S. Saloustros, M. Cervera, L. Pelà and P. Roca. "Tracking multi-directional intersecting cracks in masonry shear walls under cyclic loading" (2017) Meccanica, Special Issue on New Trends in Mechanics of Masonry, 1-20, http://dx.doi.org/10.1007/s11012-017-0712-3.

92. S. Saloustros, L. Pelà, M. Cervera and P. Roca. "An enhanced finite element macro-model for the realistic simulation of localized cracks in masonry structures: A large-scale application" (2017) International Journal of Architectural Heritage, 1-16,
http://dx.doi.org/10.1080/15583058.2017.1323245.

91. N. M. Lafontaine, M. Cervera, R. Rossi and M. Chiumenti. "Una formulación mixta estabilizada expí­cita para plasticidad con localización de deformaciones" (2017) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingenierí­a, 33, 3, 250-261, http://dx.doi.org/10.1016/j.rimni.2016.06.001.

90. Wu, J.-Y. and Cervera, M. "Strain localization analysis of elastic-damaging frictional-cohesive materials: Analytical results and numerical verification" (2017) Materials, 10(4), 434, Special Issue on Computational Mechanics of Cohesive-Frictional Materials, http://dx.doi.org/10.3390/ma10040434.

89.
Cervera, M. and Tesei, C. "An energy-equivalent d+/d- damage model with enhanced microcrack closure-reopening capabilities for cohesive-frictional materials" (2017) Materials, 10(4), 433, Special Issue on Computational Mechanics of Cohesive-Frictional Materials, http://dx.doi.org/10.3390/ma10040433.

88. L. Benedetti, M. Cervera and M. Chiumenti. "3D numerical modelling of twisting cracks under bending and torsion of skew notched beams" (2017) Engineering Fracture Mechanics (D1), 176, 235–256, http://dx.doi.org/10.1016/j.engfracmech.2017.03.025.

87. N. M. Lafontaine, R. Rossi, M. Cervera and M. Chiumenti. "Formulación mixta estabilizada explícita de elementos finitos para sólidos compresibles y quasi-incompresibles" (2017) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 33(1-2), 35–44 http://dx.doi.org/10.1016/j.rimni.2015.09.003.

86. N. Dialami, M. Cervera, M. Chiumenti and C. Agelet de Saracibar. "A fast and accurate two-stage strategy to evaluate the effect of the pin tool profile on metal flow, torque and forces during friction stir welding" (2017) International Journal of Mechanical Sciences, 122, 215–227, http://dx.doi.org/10.1016/j.ijmecsci.2016.12.016.

85. S. Saloustros, L. Pelà, M. Cervera and P. Roca. "Finite Element Modelling of Internal and Multiple Localized Cracks" (2017) Computational Mechanics, 59:2, 299–316, http://dx.doi.org/10.1007/s00466-016-1351-6.

84. M. Chiumenti, X. Lin, M. Cervera, W. Lei, Y. Zheng and W. Huang. "Numerical simulation and experimental calibration of Additive Manufacturing by blown powder technology. Part I: thermal analysis" (2017) Rapid Prototyping Journal, 23 2, 448-463, http://dx.doi.org/10.1108/RPJ-10-2015-0136.

83. N. Dialami, M. Cervera, M. Chiumenti and C. Agelet de Saracibar. "Local-global strategy for the prediction of residual stresses in FSW processes" (2017) International Journal of Advanced Manufacturing Technology, 88:9, 3099–3111, http://dx.doi.org/10.1007/s00170-016-9016-3.

82. M. Chiumenti, M. Cervera, N. Dialami, B. Wu, J. Li and C. Agelet de Saracibar. "Numerical modeling of the electron beam welding and its experimental validation" (2016) Finite Elements in Analysis and Design, 121, 118–133, http://dx.doi.org/10.1016/j.finel.2016.07.003.

81. M. Cervera, N. Lafontaine, R. Rossi and M. Chiumenti. "Explicit mixed strain-displacement finite elements for compressible and quasi-incompressible elasticity and plasticity” (2016) Computational Mechanics, 58: 3, 511–532, http://dx.doi.org/10.1007/s00466-016-1305-z.

80. L. Pelà, J. Bourgeois, P. Roca, M. Cervera, M. Chiumenti. "Analysis of the effect of provisional ties in the construction and current deformation of Mallorca cathedral" (2016) International Journal of Architectural Heritage, 10(4), 418–437,
http://dx.doi.org/10.1080/15583058.2014.996920.

79.
Wu, J.-Y. and Cervera, M. "Thermodynamically consistent plastic-damage framework for localized failure in quasi-brittle solids: material model and strain localization analysis" (2016) Journal of Solids and Structures, 88–89 227–247, http://dx.doi.org/10.1016/j.ijsolstr.2016.03.005.

78. N. Dialami, M. Chiumenti, M. Cervera and C. Agelet de Saracibar. "Challenges in thermo-mechanical analysis of Friction Stir Welding processes" (2016) Archives of Computational Methods in Engineering, http://dx.doi.org/10.1007/s11831-015-9163-y, in press.

77. E. Moreno, A. Larese and M. Cervera. "Modeling of Bingham and Herschel-Bulkley flows with mixed stabilized P1/P1 finite elements using orthogonal subgrid scales" (2016) Journal of Non-Newtonian Fluid Mechanics, 228, 1-16, http://dx.doi.org/10.1016/j.jnnfm.2015.12.005.

76.
P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera and J-P. Ponthot. "3D numerical models of FSW processes with non-cylindrical pin" (2016) Advances in Materials and Processing Technologies, http://dx.doi.org/10.1080/2374068X.2015.1121035.

75. N. M. Lafontaine, R. Rossi, M. Cervera and M. Chiumenti. "Formulación mixta estabilizada explícita de elementos
finitos para sólidos compresibles y quasi-incompresibles"
(2016) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, http://dx.doi.org/10.1016/j.rimni.2015.09.003,  in press.

74. E. Moreno y M. Cervera. "Elementos  finitos  mixtos  estabilizados  para  flujos  confinados de Bingham y de Herschel-Bulkley. Parte II: Soluciones numéricas" (2016) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, http://dx.doi.org/10.1016/j.rimni.2015.02.002,  in press.

73. E. Moreno y M. Cervera. "Elementos  finitos  mixtos  estabilizados  para  flujos   confinados de Bingham y de Herschel-Bulkley. Parte I: Formulación" (2016) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 32(2), 100–109, http://dx.doi.org/10.1016/j.rimni.2015.02.004.

72. S. Saloustros, L. Pelàand M. Cervera. "A crack-tracking technique for localized cohesive-frictional damage" (2015) Engineering Fracture Mechanics,
150, 96-114, http://dx.doi.org/10.1016/j.engfracmech.2015.10.039.

71.
P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, R. Boman and J-P. Ponthot. "3D numerical models of FSW processes with non-cylindrical pin" (2015) Submitted to Advanced Modeling and Simulation in Engineering Sciences, 2:27, 1-19, http://dx.doi.org/10.1186/s40323-015-0048-2.

70. Wu, J.-Y. and Cervera, M. "On the equivalence between traction- and stress-based approaches for the modeling of localized failure in solids" (2015) Journal of the Mechanics and Physics of Solids, 82, 137-163,
http://dx.doi.org/10.1016/j.jmps.2015.05.016.

69. Cervera, M. and Wu, J.-Y., "On the conformity of strong, regularized, embedded and smeared discontinuity approaches for the modeling of localized failure in solids" (2015) Journal of Solids and Structures, 71, 19-38,
http://dx.doi.org/10.1016/j.ijsolstr.2015.05.016.

68. Cervera, M., Chiumenti, M., Benedetti, L., Codina, R. "Mixed stabilized finite element methods in nonlinear solid mechanics. Part III: Compressible and incompressible plasticity" (2015) Computer Methods in Applied Mechanics and Engineering, 285, 752-775,
http://dx.doi.org/10.1016/j.cma.2014.11.040.

67. N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar and J.P. Ponthot. "Material Flow Visualization in Friction Stir Welding via Particle Tracing" (2015) International Journal of Material Forming, 8 (2), 167-181, http://dx.doi.org/10.1007/s12289-013-1157-4.

66. N. M. Lafontaine, R. Rossi, M. Cervera and M. Chiumenti. "Explicit mixed strain-displacement finite element for dynamic geometrically non-linear solid mechanics" (2015) Computational Mechanics, 55, 543-559,
http://dx.doi.org/10.1007/s00466-015-1121-x.

65. Chiumenti, M., Cervera, M., Codina, R. "A mixed three-field FE formulation for stress accurate analysis including the incompressible limit" (2015) Computer Methods in Applied Mechanics and Engineering,
283, pp. 1095-1116, http://dx.doi.org/10.1016/j.cma.2014.08.004.

64. L. Benedetti, M. Cervera and M. Chiumenti. "Stress-accurate mixed FEM for soil failure under shallow foundations involving strain localization in plasticity" (2015) Computers and Geotechnics,
64, pp. 32-47, http://dx.doi.org/10.1016/j.compgeo.2014.10.004.

63. L. Pelà, M. Cervera, S. Oller and M. Chiumenti. "A localized damage model for Orthotropic Materials" (2014) Engineering Fracture Mechanics, 124-125, pp. 196-216, http://dx.doi.org/10.1016/j.engfracmech.2014.04.027.

62.
C. Agelet de Saracibar, M. Chiumenti, M. Cervera, N. Dialami and A. Seret. "Computational modeling and sub-grid scale stabilization of incompressibility and convection in the numerical simulation of friction stir welding processes" (2014) Archives of Computational Methods in Engineering, 21, pp. 3-37, http://dx.doi.org/10.1007/s11831-014-9094-z.

61.
P. Bussetta, N. Dialami, R. Boman, M. Chiumenti, C. Agelet de Saracibar, M. Cervera and J-P. Ponthot. "Comparison of a fluid and a solid approach for the numerical simulation of Friction Stir Welding with a non-cylindrical pin" (2014  Steel Research International, 85, pp. 968-979, http://dx.doi.org/10.1002/srin.201300182.

60. N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar. "An apropos kinematic framework for the numerical modelling of Friction Stir Welding" (2013) Computers & Structures, 117, pp. 48-57.

59. M. Chiumenti, M. Cervera, C. Agelet de Saracibar, N. Dialami. "Numerical Modeling of Frictional Stir Welding Processes" (2013) Comp. Meths. In Appl. Mech. And Eng., 254, pp. 353-369.

58. P. Roca, M. Cervera, L. Pelà, R. Clemente, M. Chiumenti. "Continuum FE models for the analysis of a representative bay in Mallorca Cathedral" (2013) Engineering Structures, 46, pp. 653-670.

57. L. Pelà, M. Cervera, P. Roca. "An orthotropic damage model for the analysis of masonry structures" (2013) Construction and Building Materials, 41, pp. 957-967.

56. P. Roca, M. Cervera, L. Pelà, R. Clemente, M. Chiumenti. "Viscoelasticity and damage model for creep behaviour of historical masonry structures" (2012) The Open Civil Engineering Journal, 6 (Suppl. 1-M7), pp. 188-199.

55. M. Cervera, M. Chiumenti, D. Di Capua. "Benchmarking on bifurcation and localization in J2 plasticity for plane stress and plane strain conditions" (2012) Computer Methods in Applied Mechanics and Engineering, 241-244, pp. 206-224.

54. M. Cervera, M. Chiumenti, R. Codina. "Mesh objective modeling of cracks using continuous linear strain and displacement interpolations" (2011) International Journal for Numerical Methods in Engineering, 87 (10), pp. 962-987.

53. Pelà, L., Cervera, M., Roca, P. "Continuum damage model for orthotropic materials: Application to masonry" (2011) Computer Methods in Applied Mechanics and Engineering, 200 (9-12), pp. 917-930.

52. Roca, P., Cervera, M., Gariup, G., Pelà, L. "Structural analysis of masonry historical constructions. Classical and advanced approaches" (2010) Archives of Computational Methods in Engineering, 17 (3), pp. 299-325.

51. Cervera, M., Pelà, L., Clemente, R., Roca, P. "A crack-tracking technique for localized damage in quasi-brittle materials" (2010) Engineering Fracture Mechanics, 77 (13), pp. 2431-2450.

50. Cervera, M., Chiumenti, M., Codina, R. "Mixed stabilized finite element methods in nonlinear solid mechanics. Part II: Strain localization" (2010) Computer Methods in Applied Mechanics and Engineering, 199 (37-40), pp. 2571-2589.

49. Cervera, M., Chiumenti, M., Codina, R. "Mixed stabilized finite element methods in nonlinear solid mechanics. Part I: Formulation" (2010) Computer Methods in Applied Mechanics and Engineering, 199 (37-40), pp. 2559-2570.

48. Chiumenti, M., Cervera, M., Salmi, A., Agelet de Saracibar, C., Dialami, N., Matsui, K. "Finite element modeling of multi-pass welding and shaped metal deposition processes" (2010) Computer Methods in Applied Mechanics and Engineering, 199 (37-40), pp. 2343-2359.

47. Cervera, M., Chiumenti, M. "Size effect and localization in J2 plasticity" (2009) International Journal of Solids and Structures, 46 (17), pp. 3301-3312.

46. Cervera, M., "A smeared-embedded mesh-corrected damage model for tensile cracking" (2008) International Journal for Numerical Methods in Engineering, 76 (12), pp. 1930-1954.

45. Chiumenti, M., de Saracibar, C.A., Cervera, M. "On the Numerical modeling of the thermomechanical contact for metal casting analysis" (2008) Journal of Heat Transfer, 130 (6), art. no. 061301.

44. R. Clemente, M. Cervera, P. Roca "El modelo daño localizado aplicado al análisis de estructuras de obra de fábrica" (2008) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.24, Num.1.

43. Cervera, M. "An orthotropic mesh corrected crack model" (2008) Computer Methods in Applied Mechanics and Engineering, 197 (17-18), pp. 1603-1619.

42. Q. Valverde, M. Chiumenti, C. Agelet de Saracibar, M. Cervera "Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en grandes deformaciones" (2006) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.22, Num.3.

41. Cervera, M., Chiumenti, M. "Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique" (2006) Computer Methods in Applied Mechanics and Engineering, 196 (1-3), pp. 304-320.

40. C. Agelet de Saracibar, M. Chiumenti, M. Cervera "Current developments on the coupled thermomechanical computational modeling of metal casting processes" (2006) Int. J. on Comp. Methods in Material Science, Vol.6, Num.1-2.

39. Cervera, M., Chiumenti, M. "Smeared crack approach: Back to the original track" (2006) International Journal for Numerical and Analytical Methods in Geomechanics, 30 (12), pp. 1173-1199.

38. Agelet de Saracibar, C., Chiumenti, M., Valverde, Q., Cervera, M. "On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity" (2006) Computer Methods in Applied Mechanics and Engineering, 195 (9-12), pp. 1224-1251.

37. Q. Valverde, M. Chiumenti, M. Cervera, C. Agelet de Saracibar "Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en pequeñas deformaciones" (2005) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.21, Num.4.

36. Faria, R., Oliver, J., Cervera, M. "Modeling material failure in concrete structures under cyclic actions" (2004) Journal of Structural Engineering, 130 (12), pp. 1997-2005.

35. Chiumenti, M., Valverde, Q., Agelet de Saracibar, C., Cervera, M. "A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra" (2004) International Journal of Plasticity, 20 (8-9), pp. 1487-1504.

34. Cervera, M., Chiumenti, M., de Saracibar, C.A. "Softening, localization and stabilization: Capture of discontinuous solutions in J2 plasticity" (2004) International Journal for Numerical and Analytical Methods in Geomechanics, 28 (5), pp. 373-393.

33. Cervera, M., Chiumenti, M., Agelet de Saracibar, C. "Shear band localization via local J2 continuum damage mechanics" (2004) Computer Methods in Applied Mechanics and Engineering, 193 (9-11), pp. 849-880.

32. Cervera, M., Chiumenti, M., Valverde, Q., Agelet de Saracibar, C. "Mixed linear/linear simplicial elements for incompressible elasticity and plasticity" (2003) Computer Methods in Applied Mechanics and Engineering, 192 (49-50), pp. 5249-5263.

31. Chiumenti, M., Valverde, Q., Agelet De Saracibar, C., Cervera, M. "A stabilized formulation for incompressible elasticity using linear displacement and pressure Interpolations" (2002) Computer Methods in Applied Mechanics and Engineering, 191 (46), pp. 5253-5264.

30. Cervera, M., Faria, R., Oliver, J., Prato, T. "Numerical modelling of concrete curing, regarding hydration and temperature phenomena" (2002) Computers and Structures, 80 (18-19), pp. 1511-1521.

29. M. Cervera, J. Garcí­a Soriano "Simulación numérica del comportamiento termo-mecánico de presas de HCR. Parte II: Aplicación a la Presa de Rialb" (2002) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.18, Num.1.

28. M. Cervera, J. Oliver, T. Prato, J. García Soriano "Simulación numérica del comportamiento termo-mecánico de presas de HCR. Parte I: Modelización y calibración" (2001) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.17, Num.4.

27. Agelet de Saracibar, C., Cervera, M., Chiumenti, M. "On the constitutive modeling of coupled thermomechanical phase-change problems" (2001) International Journal of Plasticity, 17 (12), pp. 1565-1622.

26. Cervera, M., Oliver, J., Prato, T. "Simulation of construction of RCC dams. II: Stress and damage" (2000) Journal of structural engineering New York, N.Y., 126 (9), pp. 1062-1068

25. Cervera, M., Oliver, J., Prato, T. "Simulation of construction of RCC dams. I: Temperature and aging" (2000) Journal of structural engineering New York, N.Y., 126 (9), pp. 1053-1060.

24. Cervera, M., De Saracibar, C.A., Chiumenti, M. "Thermo-mechanical analysis of industrial solidification processes" (1999) International Journal for Numerical Methods in Engineering, 46 (9), pp. 1575-1591.

23. Cervera, M., Oliver, J., Prato, T. "Thermo-chemo-mechanical model for concrete. II: Damage and creep" (1999) Journal of Engineering Mechanics, 125 (9), pp. 1028-1038.

22. Cervera, M., Oliver, J., Prato, T. "Thermo-chemo-mechanical model for concrete. I: Hydration and aging" (1999) Journal of Engineering Mechanics, 125 (9), pp. 1018-1027.

21. Oliver, J., Cervera, M., Manzoli, O. "Strong discontinuities and continuum plasticity models: The strong discontinuity approach" (1999) International journal of plasticity, 15 (3), pp. 319-351.

20. Agelet De Saracibar, C., Cervera, M., Chiumenti, M. "On the formulation of coupled thermoplastic problems with phase-change" (1999) International journal of plasticity, 15 (1), pp. 1-34.

19. Bugeda, G., Cervera, M., Lombera, G. "Numerical prediction of temperature and density distributions in selective laser sintering processes" (1999) Rapid Prototyping Journal, 5 (1), pp. 21-26.

18. Barbat, A.H., Cervera, M., Hanganu, A., Cirauqui, C., Oñate, E. "Failure pressure evaluation of the containment building of a large dry nuclear power plant" (1998) Nuclear Engineering and Design, 180 (3), pp. 251-270.

17. Faria, R., Oliver, J., Cervera, M. "A strain-based plastic viscous-damage model for massive concrete structures" (1998) International Journal of Solids and Structures, 35 (14), pp. 1533-1558.

16. Cervera, M., Oliver, J., Manzoli, O. "A rate-dependent isotropic damage model for the seismic analysis of concrete dams" (1996) Earthquake Engineering and Structural Dynamics, 25 (9), pp. 987-1010.

15. Cervera, M., Codina, R., Galindo, M. "On the computational efficiency and implementation of block-iterative algorithms for nonlinear coupled Problems" (1996) Engineering Computations (Swansea, Wales), 13 (6), pp. 4-30.

14. Cervera, M., Oliver, J., Faria, R. "Seismic evaluation of concrete dams via continuum damage models" (1995) Earthquake Engineering & Structural Dynamics, 24 (9), pp. 1225-1245.

13. A.H. Barbat, M. Cervera, C. Cirauqui, A. Hanganu, E. Oñate "Evaluación de la presión de fallo del edificio de contención de una central nuclear, tipo PWR-W tres lazos. Parte II: simulación numérica" (1995) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.11, Num.2.

12. M. Cervera, A.H. Barbat, A. Hanganu, E. Oñate, C. Cirauqui "Evaluación de la presión de fallo del edificio de contención de una central nuclear, tipo PWR-W tres lazos. Parte I: metodología" (1995) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.11, Num.2.

11. Bugeda, G., Cervera, M., Lombera, G., Oñate, E. "Numerical analysis of stereolithography processes using the finite element method" (1995) Rapid Prototyping Journal, 1 (2), pp. 13-23.

10. G.Lombera, G.Bugeda, M.Cervera, E.Oñate. "Análisis numérico de procesos de estereolitografía" (1995) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.11, Num.2.

9. Onate, E., Cervera, M., Zienkiewicz, O.C. "Finite volume format for structural mechanics" (1994) International Journal for Numerical Methods in Engineering, 37 (2), pp. 181-201.

8. Onate, E., Cervera, M. "Derivation of thin plate bending elements with one degree of freedom per node: a simple three node Triangle" (1993) Engineering computations, 10 (6), pp. 543-561.

7. Codina, R., Cervera, M., Onate, E. "Penalty finite element method for non-Newtonian creeping flows" (1993) International Journal for Numerical Methods in Engineering, 36 (8), pp. 1395-1412.

6. M. Cervera, J. Oliver, M. Galindo "Numerical Analysis of Dams with Extensive Cracking due to Concrete Hydration: Simulation of a Real Case" (1992) Dam Engineering, Vol.3, Num.1.

5. Codina, R., Oñate, E., Cervera, M. "The intrinsic time for the streamline upwind/Petrov-Galerkin formulation using quadratic elements" (1992) Computer Methods in Applied Mechanics and Engineering, 94 (2), pp. 239-262.

4. Cervera, M., Oliver, J., Herrero, E., Oñate, E. "A computational model for progressive cracking in large dams due to the swelling of concrete" (1990) Engineering Fracture Mechanics, 35 (1-3), pp. 573-585.

3. M. Cervera, E. Hinton, "Análisis dinámico en rotura de estructuras laminares tridimensionales de hormigón armado" (1987) Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.3, Num.1.

2. Cervera, M., Hinton, E., Hassan, O. "Nonlinear analysis of reinforced concrete plate and shell structures using 20-noded isoparametric brick elements" (1987) Computers and Structures, 25 (6), pp. 845-869.

1. Cervera, M., Liu, Y.C., Hinton, E. "Preconditioned conjugate gradient method for the non-linear finite element analysis with particular reference to 3D reinforced concrete structures" (1986) Engineering computations, 3 (3), pp. 235-242.

 

 

 

Teaching Books

Mecánica Avanzada de Estructuras.
M. Cervera y J. M. González.
Ediciones CIMNE.
Septiembre, 2020,
https://www.researchgate.net/publication/344076329_Mecanica_Avanzada_de_Estructuras.

Análisis Matricial de Estructuras.
E. Blanco, M. Cervera y B. Suárez.
Ediciones CIMNE. 2ª edición, Junio, 2015,
http://dx.doi.org/10.13140/RG.2.1.1391.8564.

Resistencia de Materiales.
M. Cervera y E. Blanco.
Ediciones CIMNE.
Febrero, 2015,
https://www.researchgate.net/publication/309763299_Resistencia_de_Materiales.

Mecánica de Estructuras.
M. Cervera y E. Blanco.
Ediciones CIMNE.
Julio, 2014.

Mecánica y Resistencia de Materiales.
M. Cervera y E. Blanco.
Ediciones CIMNE.
Diciembre, 2012.

Estática de Estructuras.
M. Chiumenti y M. Cervera.
Ediciones CIMNE.
Junio, 2007.

Mecánica de Estructuras Libro 1: Resistencia de Materiales.
M. Cervera y E. Blanco.
Colección Politex. Ediciones UPC. Septiembre, 2002,
http://dx.doi.org/10.13140/RG.2.1.4664.1763.

Mecánica de Estructuras Libro 2: Métodos de Análisis.
M. Cervera y E. Blanco.
Colección Politex. Ediciones UPC. Enero, 2003,
http://dx.doi.org/10.13140/RG.2.1.1530.7362.